Stage de certification Cisco CCNA à New York
<Cisco Certified Network Associate>
Configurer
des adresses IP, un masque de sous-réseau sur des routeurs et des ordinateurs
hôtes. Configurer des protocoles de routage.
Effectuer une configuration initiale sur un commutateur et configurer
des commutateurs avec des VLAN.
Exécuter et trouver des solutions des listes de contrôle d’accès sur les
routeurs. Effectuer un dépannage de protocole de routage et des VLAN.
Effectuer un dépannage WAN. Décrire STP. Évaluer une communication TCP/IP
et ses protocoles associés.
Évaluer les règles de contrôle de paquet de données. Utiliser le modèle
OSI comme guide de dépannage de réseau.
Concevoir une réseau interréseau utilisant la technologie Cisco.
Lire le contenu décrit en anglais
Configure IP addresses, subnet mask on routers and hosts. Configure
routing protocols.
Perform initial configuration on a switch and configure swiches with
VLAN.
Implement and troubleshoot Access Lists on routers. Perform VLAN and
routing protocol troubleshooting. Perform WAN troubleshooting. Describe
STP. Evaluate TCP/IP communication and its associated protocols. Evaluate
rules of packet control. Utilize the OSI model as a guide for network
troublshooting. Design an internetwork using Cisco technology.
- The student will learn to describe the functions of various network devices.
- Select correct components to meet proper network specification.
- Use the OSI and TCP/IP models to explain how data flows in a network.
- Describe the impact of applications ( Voice Over IP and Video Over IP) on a network.
- Determine the path between two hosts across the network.
- Differential between LAN and WAN operations.
- Select appropriate media, cable and connectors to connect switches to other network devices and hosts.
- Perform and verify initial switch configuration tasks including remote access management.
- Verify network status and switch operation using basic utilities like ping, traceroute, telnet, SSH, arp, ipconfig, Show and debug commands.
- Identify describe and resolve common switched network media issues, configuration issues, auto negotiation and switch hardware failures.
- Describe enhanced switching technologies including but not limited to VTP, VLAN, PVSTP and 802.1q.
- Configure verify and troubleshoot VTP and inter-VLAN routing.
- Implement basic switch security including port security, trunk access, management, VLAN other than VLAN1.
- Describe the operation and benefits of using private and public IP addressing.
- Explain the operation and benefits of using DHCP and DNS.
- Configure, verify and troubleshoot DHCP, DNS operation on a router.
- Implement static and dynamic addressing services for hosts in a LAN environment.
- Calculate and apply an addressing scheme using VLSM IP addressing design to a network.
- Describe IPv6 addresses.
- Identify and correct problems associated with IP addressing and host configurations.
- Describe basic routing concepts including packet forwarding, router lookup process.
- Describe operation of routers including router boot-up, POST and router components.
- Configure, verify and troubleshoot RIPv2.
- Configure, verify and troubleshoot OSPF.
- Configure, verify and troubleshoot EIGRP
- Verify router hardware and software operations using SHOW and DEBUG commands.
- Implement basic router security.
- Describe the standards associated with wireless media including IEEE WI-FI alliance, ITU/FCC.
- Identify and describe the purpose of the components in a small wireless network using SSID, BSS, ESS.
- Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point.
- Compare and contrast wireless security features and capabilities of WPA including open, WEP, WPA-1 and WPA-2.
- Identify common issues with implementing wireless networks including interface, miss configurations.
- Describe today’s increasing network security.
- Explain the need to implement a comprehensive security policy to minimize the threats.
- Describe the functions of common security appliances and applications.
- Describe recommended security practices including initial steps to secure network devices.
- Describe the purpose and types of ACL.
- Configure and apply ACL based on network filtering requirements including CLI/SDM.
- Configure and apply ACL to limit telnet and SSH access to the router.
- Verify and monitor ACL in a network environment.
- Troubleshoot ACL issues.
- Explain the basic operation of NAT.
- Configure NAT for the given network requirements.
- Troubleshoot NAT issues.
- Describe different methods for connecting to a WAN.
- Configure and verify a basic WAN serial connection.
- Configure and verify Frame Relay on Cisco Routers.
- Describe VPN technology including importance, benefits, role, impact, components.
- Configure and verify a PPP connection between routers.
Frais de scolarité
Cours à temps partiel: Vérifier le calendrier
- ► Apprenez vite et efficacement
- ► Profitez du week-end
- ► À prix abordable
| Semaines | Heures | Frais d’inscription | Livres | Frais de cours | Total |
|---|---|---|---|---|---|
| 4 | 28 | US$ | 50US$ | 600US$ | 680US$ |
Cours à temps plein : Vérifier le calendrier
- ► Des cours détaillés plus efficaces
- ► Des semaines de cours intensives de 18 heures
- ► Des programmes pratiques
renforcés
- ► Labo en week-end disponible
- ► Tests d’évaluation mis en place
| Semaines | Heures | Frais d’inscription | Livres | Frais de cours | Total |
|---|---|---|---|---|---|
| 6 | 88 | 100US$ | 50US$ | 1,040US$ | 1,190US$ |
Calendrier
- ► Cours à temps plein, 18 heures/semaine <du lundi au vendredi, 5 jours/semaine>
- Matin : du lundi au jeudi de 10h00 à 13h30, vendredi de 10h00 à 14h00
- Après-midi : du lundi au jeudi de 14h00 à 17h30, vendredi de 14h00 à 16h00
- ► Cours à temps partiel, 7 heures/semaine
- Samedi : de 10h00 à 17h00
Méthodes de paiement acceptées
- ► Carte de crédit
– Visa/Master/American Express

- ► Chèques – Chèques personnels/Chèques de voyage/Mandats
- ► Autres – Transfert/Virement bancaire/Paiement en ligne par Google





